JBMACH

Products
+
  • SG(Z)刮刀卸料离心机.jpg
  • SG(Z)刮刀卸料离心机.jpg

SG (z) Scraper Discharge Centrifuge

SG (z) tripod scraper lower discharge centrifuge is a kind of scraper lower discharge centrifuge with periodic operation and intermittent operation. According to the control type, it is divided into automatic scraper discharge centrifuge (SGZ Series) and manual scraper discharge centrifuge (SG series).

Category:

Peeler Centrifuge

Detail

1. Centrifuge overview:

SG (z) tripod scraper lower discharge centrifuge is a kind of scraper lower discharge centrifuge with periodic operation and intermittent operation. According to the control type, it is divided into automatic scraper discharge centrifuge (SGZ Series) and manual scraper discharge centrifuge (SG series). Under the electrical control, after the drum starts to reach the feeding speed, the control system opens the feeding valve and the treated suspension enters the drum from the feed pipe. Under the strong centrifugal force generated by the high-speed rotation of the drum, the suspension entering the drum is uniformly distributed on the filter medium on the inner wall of the drum, forming a hollow cylinder. The liquid phase is thrown out of the drum through the filter medium and many holes on the drum, collected by the inner wall of the casing and the chassis, and discharged from the liquid outlet pipe, while the solid particles are left on the filter medium. When the feeding amount reaches the set value, the controller of the same material layer (or feeding time) sends a signal to the control system to close the feeding valve. The materials can be washed according to the process needs. After washing, the secondary dehydration is carried out. The control system controls the brake device to reduce the rotating speed of the rotary body to the unloading speed. The unloading mechanism is a narrow scraper to scrape the materials off the drum wall, and then discharged from the bottom of the base through the unloading port at the bottom of the drum. The machine completes a working cycle.

SG (z) tripod scraper lower discharge centrifuge adopts intermittent periodic working mode, and one working procedure is divided into seven processes: 1 Drum start: 2 Feeding: 3 Dehydration: 4 Washing material: 5 Secondary dehydration: 6 Drum braking to low speed: 7 Unloading. To achieve better work efficiency. SG (z) tripod scraper lower discharge centrifuge uses narrow scraper drum low-speed scraper to reduce the crushing of materials. The machine is simple in structure.

2. Main specifications and models:

Sg800 tripod scraper lower discharge centrifuge

SG1000 tripod scraper lower discharge centrifuge

Sg1250 tripod scraper lower discharge centrifuge

SGZ1000 tripod scraper lower discharge automatic centrifuge

Sgz1250 tripod scraper lower discharge automatic centrifuge

3. Application fields:

SG (z) tripod scraper lower discharge centrifuge can be widely used in chemical, pharmaceutical, food, light industry and other industries. Such as starch, potassium chloride, table salt, scallion, heavy alkali, caustic soda, glyphosate, sodium cyanide, calcium hydrogen phosphate, ammonium chloride, etc.

Feed

Unloading

Centrifuge

Recommended Products

I Want to Consult

Submit