GK horizontal peeler centrifuges are mainly composed of the rotating components that include the perforated basket and its shaft, driving system, the inertia block system (NL configuration), hydraulic system, pneumatic system, and electrical control system. The peeled filter cake can be discharged from the centrifuge through an inclined chute or a horizontal screw conveyor, etc.

GKH is designed with the siphonage as similar as vacuum pipe except the functions of common peeler centrifuge. Before feeding, open backflush valve to regenerate the filter medium, and materials are evenly distributed onto filter medium on inner wall of basket by distributor in feeding. Liquid phase passes through filter medium and gaps between internal baskets under the action of centrifugal force, and enters siphon chamber through the basket and through-hole of siphon chamber and finally discharges from siphon pipe. Solid phase is retained on filter medium and forms filter cake. Stop feeding when filter cake layer reaches the set thickness. Next, open the washing valve, soak and wash the filter cake in basket, perform the secondary dewatering after washing, unload materials after dewatering materials for a certain time and fully drying them. Start scraper and solid materials will be scraped and discharged out of machine from discharge pipes, and scraper will retract and enter the next cycle after unloading materials.

HR two-stage pusher centrifuges are supported on a frame through bearing assembly and mainly composed of oil pump assembly, pusher mechanism, frame, bearing assembly, basket, screen, and casing. For the 280/400/500 series, an oil cooler is installed inside the oil tank of the frame and the pump assembly is supported by the frame, with the oil pump inserted into the oil tank. For the 630/800/1000 series, an external oil cooler is used. The rotating assembly is connected to the rotor motor pulley through V-belts. The electric control box is a separate system, and the electric control cabinet is installed in the electric control room. The on-site operation box is installed in a suitable position near the centrifuge.

HY series centrifuge is mainly composed of casing, feed assembly, basket, screen, pusher mechanism, frame, bearing seat assembly, motor, oil pump, cooler, and other components. Suspension is separated and dewatered in a basket. The oil pump pressure causes the pusher mechanism to move forward and backward. The cooler is installed in the oil tank to cool the hydraulic oil fully. The casing, bearing seat assembly, motor, and others are installed on the frame to make the machine very compact.